SEW-Eurodrive MFE Series - Specifications of Ethercat; Technical Data of the Fieldbus Interface

15
Technical data
Specifications of EtherCAT®
Manual – EtherCAT
®
Interfaces, Field Distributors
121
15.2 Specifications of EtherCAT
®
Specificatio
ns of
EtherCAT®
EtherCAT
®
Standards IEC61158, IEC61784-2
Supported baud rate 100Mbit/s (full duplex)
Connection technology 2 × M12 plug connector
Bus termination Not integrated, as bus termination is activated automatically.
OSI layer Ethernet II
Station address Setting via EtherCAT
®
master
XML file name SEW_MFE72A.xml
Vendor ID 0x59 (CANopenVendor ID)
EtherCAT
®
services CoE, FoE and EoE(VoE)
15.3 Technical data of the fieldbus interface
15.3.1 MF../Z.1. connection module with fieldbus interface
MF../Z.1.
Max. permitted total cur-
rent
16A
Ambient temperature -25°C–60°C
Storage temperature -25°C–85°C
Degree of protection IP65 (fieldbus interface and motor connection cable attached and
fastened, all plug connections sealed)
Interface PROFIBUS, PROFINET IO, EtherNet/IP™, EtherCAT
®
, DeviceNet™
Permitted cable length
between connection module
and MOVIMOT
®
max. 30m
Mass Approx. 1.0kg
25809148/EN – 01/2019