SEW-Eurodrive MFE Series - Page 124

15
Technical data
Technical data for field distributors
Manual – EtherCAT
®
Interfaces, Field Distributors
124
15.4.3 MF../MM../Z.7. field distributors
MF../MM..-..3-00/Z.7.
MOVIMOT
®
inverter MM
03D
MM
05D
MM
07D
MM
11D
MM
15D
Connection voltages V
line
AC 3 x 380V -10% – AC 500V +10%
AC 3 x 200V -10% – AC 240V +10%
Line frequency f
line
50–60Hz
Max. permitted total cur-
rent X1
(X1 terminal)
I
max
32A (according to UL max. 30A)
Motor power S1 P
Mot
0.37kW
0.5HP
0.55kW
0.75HP
0.75kW
1.0HP
1.1kW
1.5HP
1.5kW
2.0HP
Nominal line current I
line
with V
line
= AC 400V AC 1.3A AC 1.6A AC 1.9A AC 2.4A AC 3.5A
with V
line
= AC 230V AC 1.9A AC 2.4A AC 3.5A - -
Nominal output current I
N
with V
line
= AC 400V AC 1.6A AC 2.0A AC 2.5A AC 3.2A AC 4.0A
with V
line
= AC 230V AC 2.5A AC 3.2A AC 4.0A - -
Output voltage V
O
0 – V
line
Max. permitted total cur-
rent X21
(X21 terminals)
32A
Max. permitted total cur-
rent X20
(X20 terminals)
12A
Ambient temperature -25°C–40˚C (P
N
reduction: 3% I
N
per K to max. 60 °C)
Storage temperature -25°C–85°C
Degree of protection IP65 (fieldbus interface, power supply connection cover, MOVIMOT
®
in-
verter and motor connection cable attached and fastened, all plug con-
nections sealed)
Interface PROFIBUS, PROFINET IO, EtherNet/IP™, EtherCAT
®
, DeviceNet™
Permitted motor cable
length
15m (with SEW‑EURODRIVE hybrid cable, type A)
Mass Approx. 3.6kg
25809148/EN – 01/2019