SEW-Eurodrive MFE Series - Page 25

5
Mechanical installation
Tightening torques
Manual – EtherCAT
®
Interfaces, Field Distributors
25
Tighten the screws for fastening MOVIMOT
®
using 3.0 Nm in diametrically opposite
sequence.
5.2.2 Fieldbus interface / connection box cover
9007200393245323
Tighten the screws on the fieldbus interfaces or connection box cover using 2.5Nm in
diametrically opposite sequence.
5.2.3 Screw plugs
9007200393250059
Tighten the blanking plugs and the screw plugs of potentiometer f1, and of connection
X50, if applicable, using 2.5Nm.
5.2.4 EMC cable glands
The following figure shows the position of the EMC cable glands:
1138616971
25809148/EN – 01/2019