10 weeks
7
3
How to charge your SEYSSO
sonic toothbrush
Insert the toothbrush handle into the charging base to charge it. Electricity
quality is showed on the LED electricity quality display. The fast blinking red
indicator means low battery (for less than three times). The charging
indicator should blink through the charging process and turn to continuous
light when battery is fully charged. It will take about 15 hours to fully charge
the handle, and it can be used up to 70 days straight.
Result depends on a chosen brushing mode and regards using twice a day:
a. Clean:>57 days;
b. White:> 25 days;
c. Polish:> 45 days;
d. Gum Care:> 58 days;
e. Sensitive:> 70 days.
If the battery is low, the electricity quality display LED light will flash and the
speed of motor will reduce. When the battery runs out, the motor will stop
working. It needs at least 30 minutes to change for reboot and hour later it
can start to work. For convenient use, it is suggested that you use this
product after it is fully charged.
EN
To Next Page
Loading...