EasyManua.ls Logo

SGS ED 01 - Page 8

SGS ED 01
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY DETAILS
All kinds of solid liquid materials (clothes, alcohol and
derivatives, petro - chemical products, wood and plastic
materials, curtains etc) that can be burned in the area
where the device is working should never be kept.
You can use our devices side by side with our other
products on the same shelf.
Do not clean with pressurized water.
This device must be installed in accordance with the
current regulations and should only be used in a well-
ventilated place. Consult the instructions before
installation and use of the device.
8/18
The device must not be intervened except by the
manufacturer or its authorized service.
Use fire extinguishers by closing the gas valves and
electrical switches (if any) in case of fire flame, for any
reason. Never use water to extinguish the flame.
Operating voltage of the device 220 V- 240 V 220-240 V
/ 50/60 Hz. Do not use a supply voltage otherwise.
The electrical connection must be done by inserting a leakage
current fuse of 16mA in the supply fuse against the leakage current
danger.