PAGE 3
WARNINGS
• Do not operate this product if it is damaged.
• This jack is a lifting device only, it is not intended for hold-
ing weight - always use axle stands where necessary to
support the vehicle.
• No after market alterations must be made to this jack.
• Only designated attachments and adaptors supplied by sgs
engineering should be used.
• Ensure minimum distance of 50cm between static objects
such as doors, walls etc to allow for vehicle tilting.
• Never adjust the safety overload valve.
• Never top up the hydraulic system of this trolley jack using
brake fluid.
• Always lift in areas of the vehicle assembly as advised by
the vehicle manufacturer, e.g in proper jacking points etc
• Always store this trolley jack in a safe area when not in use,
away from adverse weather conditions, away from extreme
temperatures, where it cannot be tampered with, and
where children cannot play with it.
• Never use a ‘cheater’ pipe, or any other device to extend
the handle.
To Next Page
Loading...
