The device is an Adjustable Ladder Platform, Model SH33LP, designed for use with Shadow Hunter professional-grade hunting blinds. It functions as a stable and adjustable access system to elevated hunting blinds, allowing users to safely reach their desired hunting height.

Function Description

The SH33LP Adjustable Ladder Platform provides a secure and adjustable means of accessing elevated hunting blinds. It consists of a foot platform, ladder sections, and support structures that can be assembled to create a sturdy and customizable access point. The platform is designed to be connected to a hunting blind, offering a stable base for entry and exit. Its adjustable height feature allows it to adapt to various blind heights, ranging from 5 feet to 10 feet. The system emphasizes safety through its robust construction and detailed assembly instructions, including specific warnings about weight limits, proper climbing techniques, and environmental considerations.

Important Technical Specifications

Model: SH33LP Adjustable Ladder Platform
Carrying Capacity (User(s) and Equipment): 500 lbs (227 kg)
Maximum Occupancy: Two (2)
Adjustable Height Range: From 5 feet to 10 feet
Tools Required for Assembly: Opened Wrench and Socket, Phillips Head Screwdriver (Not included)
Parts List (Key Components):
- Foot Platform (2)
- Center Foot Platform (1)
- Bracket (1)
- Bottom Ladder Section (1)
- Ladder Section (2)
- Top Ladder Step (1)
- Adjuster Leg (2)
- Rear Brace (2)
- Side Post (2)
- Cross Support (2)
- Rear Post (2)
- Front Post (R) (1)
- Front Post (L) (1)
- Rail Connector (2)
- Under Support Gusset (2)
- Front Brace (2)
- Support Extension (2)
- Mainframe Support (2)
- Extension Bracket (4)
- Instruction Manual (1)
Hardware Pack (Key Components):
- Hex Bolts (various sizes: 1/4" x 1 1/4", 1/4" x 1 1/2", 1/4" x 2", 5/16" x 2 3/4", 1/4" x 3 1/4", 1/4" x 3 1/2")
- Carriage Bolt (1/4" x 2 1/2")
- Lag Screw (5/16" x 1 1/2")
- Nylock Nuts (1/4", 5/16")
- Nylon Washers
- Silent Snap Pin (1/4" x 2")

Usage Features

Adjustable Height: The platform can be configured to heights between 5 and 10 feet, accommodating different blind structures. This is achieved by combining various ladder sections (Adjuster Legs, Bottom Ladder Section, Ladder Sections) as illustrated in Figures 4, 4A, and 4B of the manual.
Secure Assembly: The assembly process involves bolting together multiple components, ensuring a rigid and stable structure. All nuts and bolts must be securely tightened after initial finger-tightening to ensure proper alignment and safety.
Three-Point Contact: Users are instructed to always maintain three-point contact (two feet and one hand, or one foot and two hands) when climbing up or down the ladder for maximum safety.
Weapon and Gear Management: For safety, weapons and gear must be unloaded and raised/lowered using a tether or pull-up rope, never carried while climbing.
Environmental Considerations: The platform should not be used in adverse weather conditions such as ice, snow, freezing rain, thunderstorms, high winds, or on unstable ground (mud, saturated soil, loose/soft soil, sand).
Pre-Use Inspection: A thorough inspection of the platform and all safety devices for signs of wear, rot, corrosion, cracks, deterioration, or other defects is mandatory before each use.
User Responsibility: The safe use and operation of the product are the sole responsibility of the user. Users must inform someone of their hunting location and carry a signaling device.
Adult Use Only: The product is designed for adult use only; individuals under 16 years of age should not use it without direct adult supervision.

Maintenance Features

Regular Inspection: Users are required to inspect the adjustable ladder platform and all related components annually, and prior to each use, for signs of wear, rot, corrosion, cracks, deterioration, or any other type of defect.
Part Replacement: Any damaged or worn parts must be replaced with original manufacturer parts. Attachment straps should be replaced annually.
Proper Storage: When not in use, the adjustable ladder platform and its components should be stored in a dry, cool, safe place, away from direct sunlight, excessive heat, or freezing temperatures. It should never be stored outdoors.
No Modifications: Users are strictly warned against removing, modifying, altering, bending, cutting, welding, drilling, or heating any portion of the platform. Unauthorized modifications or part substitutions will void the warranty and can lead to serious injury or death. Only genuine factory-authorized Summit Outdoors, LLC replacement parts should be used.
Contact for Parts: For replacement of damaged or missing parts, users should contact Summit Outdoors, LLC directly at 888-446-4868, rather than returning the product to the retailer.

Shadow Hunter SH33LP - Page 11