7
Top Ladder
Step
Ladder
Section
Bottom
Ladder
Section
Adjuster
Leg
Adjuster
Leg
Snap Pin
Snap Pin
Snap Pin
Snap Pin
Snap Pin
Snap Pin
Top Ladder
Step
Bottom
Ladder
Section
Adjuster
Leg
Adjuster
Leg
Snap Pin
Snap Pin
Your choice between
A, B, & C depends on your blind height
and should be chosen accordingly.
Adjuster Legs
have multiple
holes for added adjustment. Ensure the Platform
is level when
full connected to the blind and at full height before using the
ladder. Use two (2)
Snap Pins
to secure each
Ladder Section
that is used
together, and two (2)
Snap Pins
to secure the
Adjuster Legs
(FIGURE 4,
FIGURE 4A, FIGURE 4B).
Now you assemble the Ladder Section into
Wrap snap
pin closure around back
of tubing and secure over
end of the pin prior to use.
the
Depending on the height of your
you can use a combination of 3 choices.
A:
B:
C:
To Next Page
Loading...