Need help?Do you have a question about the Shandong Renke Control Technology RS-YG-N01 and is the answer not in the manual?
General| Category | Smoke Alarm |
|---|---|
| Model | RS-YG-N01 |
| Manufacturer | Shandong Renke Control Technology |
| Material | ABS |
| Alarm Decibel | ≥85dB |
| Operating Temperature | -10℃~+50℃ |
| Relative Humidity | ≤95%RH |
| Static Current | ≤120uA |
Detailed explanation of the RS-YG-N01 photoelectric smoke fire alarm's capabilities and features.
Technical specifications including power supply, consumption, signal output, and environmental conditions.
Diagram illustrating the system architecture and connectivity of the smoke detector.
List of required equipment and checks before proceeding with installation.
Guidelines for connecting the 485 signal line, emphasizing polarity and address uniqueness.
Important considerations for mounting location and environmental suitability.
Instructions on how to find and select the correct configuration software from the package.
Steps for selecting the COM port and configuring device baud rate and address.
Defines fundamental communication settings like data bits, parity, stop bit, error check, and baud rate.
Details the structure of data frames used in the Modbus-RTU communication protocol.
Maps register addresses to PLC addresses, content, and operating modes.
Provides an example of a host inquiry and alarm status response frame.
To Next Page