2.2 Setup WAN
Administrators can click on the drop-down arrow to select preferred connection
methods. One WAN port must be enabled to proceed.
STATIC: IP address, subnet mask, and default gateway are required to configure
WAN setting. The default gateway is 255.255.255.0
DHCP: A connection method that IP address is assigned by a router/switch in
the perimeter. IP address, subnet mask, and default gateway are not
required.
PPPOE: DSL providers typically use this option. Please enter the account and
password provided by your ISP to gain access to the Internet. If your ISP
provides you a set IP address, you are able to select STATIC.
To Next Page
Loading...