C
D
CHOOSE YOUR SIZE
pulled as you move the helmet. If not,
the helmet is too big for you; select
a smaller size. See gure B.
3. Grasp the back of the helmet at the
base and attempt to pull the helmet
off your head. Next, push the hel-
met upwards from beneath the chin
guard. You should push and pull with
relatively signicant force. If the hel-
met starts to come off, the helmet is
too big for you; select a smaller size.
4. Bend your head forward as far as
possible. The chin guard must not
touch your chest. See gure C.
5. Bend your head backwards as far
as possible. The helmet shell must not
touch your back. See gure D.
Never wrap your hair inside the
helmet, or place anything in or on your
hair inside the helmet. Never insert
padding to modify the position of the
helmet on the head.
If you have any questions about pro-
perly sizing your helmet, see your
retailer for assistance.
Each of these tests must be repeated
throughout the life of the helmet, as the
comfort padding may wear or change
over time. If, during the life of your
helmet, your helmet does not maintain
the correct t, you must replace the
helmet.
WARNING! Never lend your hel-
met to others without insuring
a proper t in accordance with these
instructions.
WARNING! If you cannot obtain
a proper t in accordance with
these instructions, DO NOT USE THE
HELMET. Select a different helmet size
or model.
5
To Next Page
Loading...
