How to
finesse your flow
START WITH TOWEL-DRIED HAIR.
Apply hair products or styling agents as desired.
2.
When excess moisture is gone, extend
nozzle and start styling with a round
brush. Slide the lever to move from pre-
styling mode to precision styling mode.
Rotate the concentrator so airflow is
always in line with the round brush.
1.
Gentle-dry with the nozzle retracted,
applying airflow from roots to ends.
4.
Finish styling by setting shape at
ends with Cool Shot.
Press the
2-in-1 Concentrator into the head of the hair dryer
until it clicks into place.
Para información en español, visita sharkbeauty.com.
3.
Apply heat in a downward motion
for smoothing. Apply heat at ends for
shaping and bending.
Product color may vary
To Next Page
