EasyManuals Logo

Shark S3901 Series Owner's Guide

Shark S3901 Series
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
1.800.798.7398
How to Attach / Detach:
The Direct Steam Nozzle Slides Directly on to the
handheld steamer. (fig. 9)
To remove wait 2-3 minutes for the tool to cool, hold the
release button and pull the tool away from the unit.
Usage:
The Direct Steam Nozzle creates direct steam spray to
clean and sanitize hard to reach nooks & crannies, flat
surfaces, toys and other places where germs may build
up. (fig. 10)
Spray direct steam and wipe clean with a wet cloth or
paper towel.
Cleaning Tips:
For effective cleaning, hold the steam output nozzle 1-2
inches away from the surface you’re cleaning.
PLEASE KEEP THESE IMPORTANT SAFEGUARDS
IN MIND WHEN USING THE APPLIANCE:
CAUTION: Do not press the steam trigger until
the Direct Steam Nozzle is snapped into the main
nozzle of your Handheld Steamer.
NOTE: To remove the Direct Steam Nozzle, press
and hold down the Handheld Release Buttons.
Then slide out the Direct Steam Nozzle using the
grip.
Using the Direct Steam Nozzle
fig. 9
g. 10
CAUTION: Do not press the steam trigger while
removing the Direct Steam Nozzle. Avoid touching
the tip of the Direct Steam Nozzle, as this will be
very hot after steaming.
NOTE: The Handheld Steamer may continue to
emit steam for a few seconds after the trigger is
released. This is normal, and the steaming will
eventually come to a stop.

Other manuals for Shark S3901 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shark S3901 Series and is the answer not in the manual?

Shark S3901 Series Specifications

General IconGeneral
BrandShark
ModelS3901 Series
CategorySteam Cleaner
LanguageEnglish

Related product manuals