24
Dimension: 140mm x 215mm
VIEW TIMER (Continued)
Example
• To restrict anybody from watching the TV for 5 hours, after watching
the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish. For
example, they could watch 1 hour of TV, turn TV off for 30 minutes,
then turn TV on and watch the remaining 1 hour on the VIEWING
TIMER.
L To change the VIEW TIMER settings. (SECRET No. is
registered)
1 Repeat “How to set VIEW TIMER” steps and select “VIEW
TIMER” during step 2. Press
VOL (+)
or
(–)
, and “INPUT
SECRET No.” will be displayed.
2 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
,
and the VIEW TIMER mode will be displayed. Repeat step
4 ~ 7.
Note:
• When you choose the correct SECRET No., the VIEW TIMER mode
is displayed. If the wrong SECRET No. is chosen, “SECRET No.
IS INCORRECT” is displayed. Input the SECRET No. again in this
case.
L To cancel the VIEW TIMER (While the TV set is OFF but the
VIEW TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear.
If you do nothing, the TV will turn off in approximately 30
seconds.
2 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
.
When you choose the correct SECRET No., the VIEW TIMER
is canceled. If the wrong SECRET No. is chosen, “SECRET
No. IS INCORRECT” is displayed. Input the SECRET No. again
in this case.
To Next Page
Loading...
Need help?
General
