Sharp 27C241 User Manual

20
Dimension: 140 X 215 mm
•
Activating the V-CHIP BLOCK
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH a/ s to move the “ ” mark to “STATUS”. Press
VOL k/l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-
CHIP BLOCK will not operate.)
3 Press MENU, then “INPUT SECRET No.” will be displayed.
Note:
• If SECRET No. is already set, skip to step 5.
4 Enter a 4-digit secret No. using the REMOTE KEYPAD.
5 Press MENU and the secret No. will be registered.
•
To temporarily cancel the V-CHIP BLOCK
1 “V-CHIP HAS BEEN ACTIVATED” appears if you view a program
with the same program rating data you configured.
Note:
•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2 Press MENU, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit secret No. using the REMOTE KEYPAD, then V-
CHIP BLOCK will be canceled temporarily. If the wrong secret No.
is chosen, “SECRET No. IS INCORRECT” will be displayed. Input
the secret No. again in this case.
Note:
• If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again.
Parent Control (V-CHIP Operation) (Continued)
(V-CHIP select screen)
→
321
654
987
100 0
ENTER
321
654
987
100 0
ENTER
27C241 20
MPAA
TV GUI
DO
W NL
EDLINES
OAD : OFF
STATU
S:ON
– – –
–
NIPUT SECRET No.
2 3 4
1
NIPUT SECRET No.
AC I VATEDT
V – CH HIP AS BEEN
23
TV– Y7
FV
– – –
–
NIPUT SECRET No.
∗ ∗ ∗
∗
NIPUT SECRET No.

Sharp 27C241 Specifications

General

Brand	Sharp
Model	27C241
Category	TV
Language	English