ENEN
• If the network name (SSID) of the wireless router to which you want to
connect is not displayed, select [Add new network] to enter a network
name (SSID).
If the problem is not resolved even after the procedures above or if
you cannot connect even with a wired network, check the status of the
network connection.
TV can connect to the Internet, but not to certain
apps and services.
• The date and time settings of this TV may be incorrect. Depending on
certain apps and services, you may not be able to connect to those apps
and services if the time is incorrect.
Press the HOME button, then select [Settings] – [Device Preferences] –
[Date & time] – [Automatic date & time] – [Use network-provided time]
to automatically adjust the time through the network.
• Check that the LAN cable or AC power cord (mains lead) of the router/
modem has been connected properly.
• Try using apps later. The app content provider’s server may be out of
service.
The remote control does not operate.
Check if the TV is working properly
• Press the power button on the TV to determine if the problem is with the
remote control or not.
Check if the remote control is working properly
• Point the remote control at the remote control sensor located at the
front of the TV.
• Keep the remote control sensor area clear from obstacles.
• Fluorescent light can interfere with remote control operation; try turning
o any uorescent light.
• Check that the orientation of each battery matches the positive (+) and
negative (-) symbols in the battery compartment.
• Battery power may be low. Remove the remote control cover and replace
the batteries with new ones.
It is not possible to control the Google Assistant with
voice
To use your voice to control the Google Assistant, you need a remote
control which has a
button, in addition the TV must be paired to
this remote control.
If your remote is not paired with the TV yet, please follow the steps below:
1. Press the
button.
2. Follow the on-screen instructions to pair the remote control with the
TV.
3. Select the detected remote control shown on the screen and press OK.
4. Once paired, the pairing screen will disappear.
SHARP
40BL2EA
40BL3EA
40BL4EA
40BL5EA
43BL2EA
43BL3EA
43BL4EA
43BL5EA
49BL2EA
49BL3EA
49BL4EA
49BL5EA
50BL2EA
50BL3EA
50BL4EA
50BL5EA
55BL2EA
55BL3EA
55BL5EA
65BL2EA
65BL3EA
65BL5EA
AAAA+AA+
40" / 101cm 43" / 108cm 49" / 123cm 50” / 126cm 55" / 139cm 65" / 164cm
62,0 W 65,0 W 82,0 W 70,0 W 110,0 W 118,0 W
91 kWh 95 kWh 120 kWh 102 kWh 161 kWh 172 kWh
<0,50 W <0,50 W <0,50 W <0,50 W <0,50 W <0,50 W
3840 (H) x 2160 (V) 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) 3840 (H) x 2160 (V)
Product che
Trademark
Model
Energy e ciency class
Visible screen size (diagonal)
On-mode power consumption
Annual energy consumption*
Standby power consumption**
O mode power consumption
Screen resolution
* - Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual
energy consumption will depend on how the television is used.
** - when the TV is turned o with the remote control and no function is active
N/A
The TV models represented in the certain Instruction Manual comply with requirements on the ТУ РБ 100085149.176-2004.
TV lifetime is 5 years. TV storage time is 18 months.
To Next Page
Loading...
Need help?
General