Sharp AQUOS LC-32Z33H - Selecting programmes; Adjusting the volume

18
• CH
r
/
s
on the TV operates the same as CH
r
/
s
on
the remote control unit.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
Watching TV
20
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOL
k
.
• To decrease the volume, press VOL
l
.
• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and
“INPUT5” (PC) modes can store volume adjustment values
separately.
Menu language settings
You can also select a language from setup menu.
Select from among 4 languages: Simplifi ed Chinese,
Traditional Chinese,English and Arabic.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Language”, and then
press ENTER.
3
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER.
4
Selecting programmes
You can change channels in several ways.
Using CH
r
/
s
on the remote control unit
• Press CH
r
to increase the channel number.
• Press CH
s
to decrease the channel number.
Adjusting the volume
(Example)
Channel display
32Z33H_en_c.indd 1832Z33H_en_c.indd 18 11/7/2008 10:59:03 AM11/7/2008 10:59:03 AM