25
Switching the analogue audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Watching TV
• “BBC2” and “99” are tentative network name and channel.
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
When receiving a monaural signal
When you press MPX, “MONO” displays.
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Stereo mode
Bilingual mode
Monaural mode
Stereo mode
Bilingual mode
Monaural mode
Reducing the start-up time
You can reduce the TV’s start-up time after the turning
on the power with the remote control unit.
Press
a
/
b
to select “Standby Mode”, and
then press ENTER.
3
Press
a
/
b
to select “Mode 1” or “Mode 2”,
and then press ENTER.
4
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press MENU to exit.
5
Selected item Description
Mode 1 Starting the TV is quick from standby.
Mode 2 Power consumption is small during
standby.
32Z33H_en_d.indd 2532Z33H_en_d.indd 25 11/7/2008 10:59:44 AM11/7/2008 10:59:44 AM
To Next Page
Loading...
