Sharp AQUOS LC-32Z33H - Manual picture settings

Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Picture”.
2
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
3
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
4
• For resetting all adjustment items to factory preset values,
press
a
/
b
to select “Reset”, press ENTER, press
a
/
b
to
select “Yes”, and then press ENTER.
• “Backlight” cannot be adjusted when “OPC” is set to “On”
or “On (Display)”.
• Select “Advanced” and then press ENTER to set “Colour
Temp.”, “Film Mode”, “Black”, “3D-Y/C” or “Monochrome”.
(See page 33.)
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Picture”.
2
Press
a
/
b
to select “OPC”, and then press
ENTER.
3
Press
a
/
b
to select the desired item, and
then press ENTER.
4
32
H
OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
• The OPC may not work when the light in the surround is
too bright or too dark,only the change of the light occured
that the OPC [the icon of the greenery] will be displayed.
Picture adjustment
You can adjust the picture to your preference.
Follow the steps to adjust the picture.
Watching TV
Manual picture settings
Selected item
c
button
d
button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness
For more brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
purplish
Skin tones become
greenish
Sharpness For less sharpness
For more sharpness
Selected item Description
On (Display) Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On Automatically adjusts
Off The brightness is fi xed at the value set in
“Backlight” (See this page).
OPC indicator
OPC indicator
Using OPC on the remote control unit
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
Light off “Off” is selected in the OPC setting.
Lighted (Green) “On” or “On (Display)” is selected in the
OPC setting.
32Z33H_en_e.indd 3232Z33H_en_e.indd 32 11/7/2008 11:00:26 AM11/7/2008 11:00:26 AM