Example
Initial setup (Continue)
Child lock
Allows you to use a password to protect certain
settings from being accidentally changed.
Lock system
If the password is not set, the "Lock system" is
invalid.
Please make sure the "Lock system" is set to
"On" before the Child lock is set. (Off, On).
Set password
1. Press MENU and the MENU screen
displays.
2. Press / to select "Initial setup".
3. Press / to select "Child lock", and then
press ENTER.
4. Press / to select "Set password", and
then press ENTER.
5. If you have already set the password, enter
it here.
6. Enter the 4-digit number as a password
using 0-9.
7. Enter the same 4-digit number as in step 6
to confirm.
NOTE
To view a locked channel, you must enter a
password. When you select a locked
channel, "Child lock has been activated " is
displayed and then enter the password.
Block programme
The "Block programme" can be select after
"Lock system" is set to "On".
On-Screen Display Menu
EN 4-10
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
>><<
To Next Page
Loading...
