Example
Initial setup (Continue)
Programme edit
Use this menu to set up a channel individually.
1. Press MENU and the MENU screen
displays.
2. Press / to select "Initial setup".
3. Press / to select "Programme edit",
and then press ENTER.
If you have already set the password, enter
it here.
See "Child lock" to set password.
4. Press / to select the channel you want
to edit, press / to select item, and then
press ENTER and press RETURN to exit.
NOTE
"Label" is available only for ATV channel.
On-Screen Display Menu
Erase: Channels can be erased individually.
Press / to select “Yes” or “No”, and
then press ENTER to erase the selected
channel.
Label: You can change channel names
individually. Maximum 5 alphanumerics can
be input. Press ENTER to start labelling.
Press / to select a character, press /
to select next character, and then press
ENTER to save.
Sort: Channel position can be sorted freely.
Skip: Channels can be skip by select “Off”
or “On”.
EN 4-12
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
>><<
To Next Page
Loading...
