Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for
exposure to radio waves recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and include safety margins designed
to assure the protection of all persons, regardless of age and health.The guidelines use a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is
2 W/kg and the highest SAR value for this device when tested at the ear is 0.83 W/kg* and when
worn on the body is 1.08 W/kg*.For body-worn operation, this mobile device has been tested and
meets the RF exposure guidelines when used with an accessory containing no metal and positioning
the handset a minimum of 5 mm from the body. Use of other accessories may not ensure
compliance with RF exposure guidelines.As SAR is measured utilizing the devices highest
transmitting power the actual SAR of this device while operating is typically below that indicated
above. This is due to automatic changes to the power level of the device to ensure it only uses the
minimum level required to reach the network.The World Health Organization has stated that present
scientific information does not indicate the need for any special precautions for the use of mobile
devices. They note that if you want to reduce your exposure then you can do so by limiting the length
of calls or using a hands-free device to keep the mobile phone away from the head.
* The tests are carried out in accordance with international guidelines for testing.
Do not stare into proximity sensor.
May temporarily affect eyesight, leading to accidents.
hearing damage, do not listen at high volume levels for long
CLASS 1 LASER P RODUCT
Consumer LASER PRODUCT
EN 50689:2021
Warranty Card
Warranty Coverage
SHARP provides a Product Warranty Statement for legally authorized SHARP products
purchased from SHARP or an authorized reseller. SHARP does not offer a worldwide
repair warranty. SHARP does not offer a worldwide repair warranty.
If the product fails to function properly under normal environmental conditions, it is
covered by a one-year warranty, which is valid from the date of purchase of the device.
And is only valid upon presentation of proof of purchase from the date of original
purchase.
In the event of natural damage or failure within the Warranty Period that is not covered by
the Exclusion of Liability, SHARP will provide you with free "Repair Service", and the
Warranty Period for any repaired Machine will be the same as the Warranty Period of the
original purchase of the machine. And will not be extended.
For repaired products that have exceeded the warranty period or have been damaged by
human error, a three-month warranty is provided for the same problem. “Repair Service”
refers to the provision of one-to-one replacement of parts in the defective machine in order
to restore the normal operation of the machine; any defective parts that have been
replaced become the property of SHARP; consumable and/or expendable items or parts
such as: except for removable batteries as six (6) months. Consumable and/or
expendable items or parts such as: except for removable batteries which are covered by a
six (6) month warranty and non-removable batteries which are covered by a twelve (12)
month warranty, other accessories, limited to cables, headphones, and power adapters (if
supplied), are covered by a six (6) month warranty.
Disclaimer
The warranty is void when the serial number on the outer casing of the device has been
torn off or improperly altered. Unauthorized removal or alteration of identification labels on
parts of the machine with serial numbers will also void the warranty on those parts.
SHARP Warranty will not apply to the machine under the following circumstances:
(1) Failure of the machine due to improper use, negligent operation, improper installation
and maintenance, disassembly or repair by persons not authorized by SHARP, or
unauthorized modification of the product structure using parts or devices not supplied
by SHARP, as determined by SHARP.
(2) Improper courier transportation. (e.g., improper packaging materials or packaging
methods to pack the machine or improper drop and collision during delivery.)
(3) Damage to the machine caused by natural or man-made disasters. (e.g. typhoons,
fires, floods, lightning, etc.)
(4) Damage caused by accidents. (e.g. liquid splashing, chemical substances, high
temperature environment, voltage surge, poor power supply, etc.)
(5) Damage caused by natural wear and tear or third party software or poisoning.
(6) The operating system of this product only supports official system updates, if users
brush the ROM system of third-party vendors or modify the system file by cracking, it
may lead to system instability as well as security risks and security threats.
SHARP does not provide data rescue and backup services for this product, and is not
responsible for the loss of data in this product due to any factors. SHARP may inspect the
Product and determine whether to repair or replace parts for products that have exceeded
the warranty period or for which the warranty does not apply, and will pay for all repairs
and replacements. Repair and replacement services will be charged at the discretion of
SHARP. Return shipping and repair costs are the responsibility of the customer. During
the warranty period for this series of products, SHARP shall not be liable to the purchaser
for any damages or losses arising out of the use of this series of products, including but
not limited to, loss of business, loss of profits, or loss of use of this series of products.
This Warranty Statement or the use and performance of this product series shall not be
liable for any damages whatsoever.
To Previous Page
Loading...
