- 46 -
Voluntary control for radio wave
interference
This product satisfies technical requirements based on VCCI Rules for
Voluntary Control Measures and its satisfied mark is displayed on the
electronic nameplate of the product.
You can see the electronic nameplate by operating the product as follows.
On the home screen → “App list screen” → [Settings] → [About phone]
→ [Authentication].
Security Codes/PIN
Security Codes
The product has various security codes that you can use.
The available security codes are as follows. Do not forget the various
security codes that are set as they are necessary for various operations and
contracts.
Be sure to change the initial values to your own numbers you have chosen.
■ Security code
Initial value A four digit number chosen by the customer and noted on
the application form
PIN
■ PIN Code
To prevent unauthorized use of the SIM card by a third party, you can set the
product to require PIN code entry every time the power is turned on. You
also need to enter PIN code when setting whether PIN code entry is
required.
If PIN code is incorrectly entered three times consecutively, the PIN code will
be locked. You can unlock the PIN code using PUK code.
To Next Page
Loading...
Need help?
General
