: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 16
53 6 Used to adjust the DSPF width
detection level.
Adjustment Operation
7 Used to enter the SPF width
detection adjustment value.
Adjustment/Setup/
Operation data output/
Check (Display/Print)
DSPF Operation
8 Used to adjust the document scan
start position. (Used to adjust the
scanner scan position in the SPF
mode front scan.)
Adjustment
55 1 Used to set the specifications of the
engine control operations. (PCU
PWB)
Setting Operation Specifications
2 Used to set the specifications of the
scanner control operations.
(Scanner control PWB)
Setting Operation Specifications
3 Used to set the specifications of the
controller operations. (MFP control
PWB)
Setting Operation Specifications
56 1 Used to transfer the MFP controller
data. (Used to repair the PWB.)
Data transfer MFP controller Data transfer
60 1 Used to check the MFP control
(DRAM) operations (read/write).
Operation test/Check ICU Operation
61 1 Used to check the operation of the
scanner (write) unit (LSU).
Operation test/Check Scanner (write)
unit (LSU)
Operation
2 Used to adjust the laser power
(absolute value) in the copy mode.
Adjustment Scanner (write)
unit (LSU)
Operation
3 Used to adjust the laser power
(absolute value) in the FAX mode.
Adjustment Scanner (write)
unit (LSU)
Operation
4 Used to adjust the laser power
(absolute value) in the printer mode.
Adjustment Scanner (write)
unit (LSU)
Operation
62 1 Used to format the hard disk. Data clear MFP controller
(HDD)
Clear
2 Used to check the operation of the
hard disk (read/write). (Only in the
model with a disk installed) (Partial
check)
Operation test/Check MFP controller
(HDD)
Operation
3 Used to check the operation of the
hard disk (read/write). (All areas
check)
Operation test/Check MFP controller
(HDD)
Operation
6 Used to check the operations of the
hard disk. (The self diag operation of
the SMART function is executed.)
Operation test/Check MFP controller
(HDD)
Clear
7 Used to check the operations of the
hard disk. (The result of the self diag
operation of the SMART function is
printed out.)
Operation test/Check MFP controller
(HDD)
Clear
8 Used to format the hard disk (the
system area excluded).
Data clear MFP controller
(HDD)
Clear
10 Used to delete a job complete list
(also to delete job log data)
Data clear MFP controller
(HDD)
Clear
11 Used to delete document filing data.
(The management area (standard
folder, user folder) is cleared.)
Data clear MFP controller
(HDD)
Clear
63 1 Used to check the result of shading
correction. (The shading correction
data are displayed.)
Adjustment/Setup/
Operation data output/
Check (Display/Print)
Optical (Image
scanning)
Operation
2 Used to execute shading. Adjustment Optical (Image
scanning)
Operation
7 Used to adjust the white plate scan
start position for shading. (Document
table mode)
Adjustment Laser (Exposure) Operation
Code
Function (Purpose) Purpose Section Item
Main Sub
To Next Page
Loading...
