AR-M550/M620/M700 SIMULATION 8 - 91
Operation/Procedure
1) Enter 0 with 10-key.
2) Press [START] key.
The dial signal is outputted.
(Dial pulse make time setting)
1) Enter 1 or 2 with 10-key.
2) Press [START] key.
3) Enter the set value with 10-key.
4) Press [START] key.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
Operation/Procedure
1) Enter the DTMF signal (1 - 9, 0, *, #) to be sent with 10-key.
2) Press [START] key.
The signal is sent in the max. send level.
When [CUSTOM SETTINGS] key is pressed during execution, the
operation is stopped.
66-16
Purpose Setting/Operation test/Check
Function
(Purpose)
Used to check the dial signal (DTMF) output in the FAX
tone dial mode. (The dial number signal set by SIM 66-
13 is outputted.) The send level can be set to an
optional level. Used to check troubles in dialing and to
check the operation. (Only when FAX is installed)
Section FAX
Item Operation
Item Set range
0 EXECUTE Execution
1 HIGH High group level 0 - 15dB
2 HIGH LOW High group - Low group 0 - 15
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-1, AND PRESS START.
0. EXECUTE
1. MAKE TIME 7 ; [+9 ms]
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-15, AND PRESS START.
[1. MAKE TIME]
1
7
SIMULATION 66-15
DIAL TEST(20PPS). EXECUTING···.
1. MAKE TIME 7 ; [+9 ms]
Press [CUSTOM SETTINGS] key.
Press [CUSTOM SETTINGS] key
or press [START] key.
Select 1 and
press [START] key.
Select 0
and press
[START] key.
Select 0 and press [START] key. Press [CUSTOM SETTINGS] key.
66-17
Purpose Setting
Function
(Purpose)
Used to check the dial signal (DTMF) output in the FAX
tone dial mode. Send level: Max. Used to check the
operation. (Only when FAX is installed)
Section FAX
Item Operation
Press [START] key. Press [CUSTOM SETTINGS] key.
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-2, AND PRESS START.
0. EXECUTE
1. HIGH 7 (dB) 2. HIGH-LOW 7
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.
1. HIGH(dB)
1
7
Press [CUSTOM SETTINGS] key
or press [START] key.
Select 1 or 2, and
press [START] key.
(When 1)
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.
1. HIGH(dB)
7
(When 2)
SIMULATION 66-16
DIAL TEST(DTMF). EXECUTING···.
1. HIGH 7 (dB) 2. HIGH-LOW 7
SIMULATION 66-17
DTMF SIGNAL OUTPUT.(LEVEL MAX) INPUT 0-9, *, #, AND
PRESS START.
1
SIMULATION 66-17
DTMF SIGNAL OUTPUT.(LEVEL MAX) EXECUTING···.
1
To Next Page
Loading...
