AR-M550/M620/M700 SIMULATION 8 - 93
Operation/Procedure
1) Enter the number corresponding to the volume with 10-key.
2) Press [START] key.
Selection of 1, 2, and 3 can be made during execution.
Operation/Procedure
1) Turn OFF the power.
2) Remove the protect pin.
3) Turn ON the power.
4) Enter the SIM 66-23 mode.
5) Press [START] key.
During operation, "EXECUTING" is displayed. When the operation is
completed normally, "COMPLETE" is displayed.
If an error occurs, "FAIL" is displayed.
6) Turn OFF the power, and attach the protect pin.
Operation/Procedure
1) Select YES/NO of data clear.
2) Press [START] key.
66-22
Purpose Setting
Function
(Purpose)
Used to adjust the handset volume. (Only when the
FAX is installed.)
Section FAX
Item Operation
1MIN Small
2 MIDDLE Medium
3MAX Large
Same display Select 3 and press [START] key.
SIMULATION 66-21
FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START.
1. REGISTERED 2. MANAGEMENT
3. FILE MANAGEMENT 4. SYSTEM ERROR
5. PROTOCOL
(When 1)
SIMULATION 66-21
FAX INFORMATION PRINT OUT. EXECUTING···
1. REGISTERED
If there is no print data,
the display returns to the
original state without printing.
Select other than 0 and
press [START] key.
After completion of backup
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
1. MIN
2. MIDDLE
3. MAX
2
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
EXECUTING···.
1. MIN
2. MIDDLE
3. MAX
2
Press [CUSTOM SETTINGS] key.
Press [START] key.
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
EXECUTING···.
1. MIN
2. MIDDLE
3. MAX
3
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
1. MIN
2. MIDDLE
3. MAX
3
Press [CUSTOM SETTINGS] key.
66-23
Purpose Setting
Function
(Purpose)
Used to download the FAX program. (Only when FAX
is installed)
Not used in the market. (For development)
Section FAX
Item
Press [START] key.
After failing of writing
66-24
Purpose Clear
Function
(Purpose)
Used to clear the FAST memory data. (Only when FAX
is installed)
Section FAX
Item Data
1 YES FAST memory data is cleared.
2 NO Not cleared.
SIMULATION 66-23
FAX PROGRAM DOWNLOAD.
EJECT PROTECT PIN, AND PRESS START.
SIMULATION 66-23
FAX PROGRAM DOWNLOAD. EXECUTING
···
SIMULATION 66-23
FAX PROGRAM DOWNLOAD.
COMPLETE
POWER OFF, AND SET PROTECT PIN
After completion of writing
SIMULATION 66-23
FAX PROGRAM DOWNLOAD.
FAIL
CHECK PROTECT PIN
SIMULATION 66-24
FAST MEMORY DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
To Next Page
Loading...
