Sharp AY-X095E - Adjusting Air Flow Direction

ADJUSTING THE AIR FLOW DIRECTION
VERTICAL AIR FLOW
The direction of the air flow is automatically preset for the optimum effect in each
mode as follows;
COOL and DRY mode Horizontal air flow
HEAT and FAN ONLY mode Diagonal air flow
( HOW TO ADJUST THE AIR FLOW DIRECTION )
Adjustment range
COOL and DRY mode HEAT and FAN ONLY mode
af
The range is narrower to m3 .
prevent condensation The range is wider for in-
from forming. creased air circulation.
Press the AUTO SWING button
once.
¢ The vertical adjustment louvre
will swing continuously within
the range shown.
Press the AUTO SWING button
again when the desired position
is reached and the louvre will
stop.
HORIZONTAL AIR FLOW
Hold the horizontal adjustment
louvres as shown and adjust the
air flow direction.
/\\ CAUTION
\ever attempt to adjust the vertical adjustment louvre manually.
¢ Manual adjustment of this louvre can cause the unit to malfunction when remote-controlled
later.
¢ When the vertical adjustment louvers are adjusted extremely downward during COOL and DRY
modes for an extended period of time, condensation might form.
E-8
ae
”
i
©
Zz
uw