Sharp BP-70C55 - Page 24

24
COPIER
4
Tap the [Copy Ratio] key.
The functions below can be enabled in easy mode.
• Paper Select
• 2-Sided Copy
• Copy Ratio
• Staple*
1
, Staple / Punch*
2
• Colour Mode
•Original
• Exposure
•N-Up
• Card Shot
•Job Build
• Blank Page Skip
• Dual Page Copy
*1 When an inner finisher, finisher, finisher (large stacker),
saddle stitch finisher or saddle stitch finisher (large
stacker) is installed.
*2 When a punch module and inner finisher, finisher,
finisher (large stacker), saddle stitch finisher or saddle
stitch finisher (large stacker) is installed.
To select more detailed settings, tap the [Detail] key and
select settings in normal mode.
5
Set the copy ratio.
After the settings are completed, tap [OK].
6
Set the number of copies and then tap
the [Colour Start] key or [B/W Start]
key.
• In the factory default state, the machine detects whether
the original is black & white or full colour when you tap the
[Colour Start] key, and automatically switches between full
colour and black & white binary scanning. When you tap
the [B/W Start] key, the machine scans in black & white
binary. For details, see the User's Manual.
• To check a preview of a document, tap the [Preview] key.
►PREVIEW SCREEN
(page 10)
Cancel copying
Cancel Copy