11
Be sure to disconnect the power cord from
the wall outlet or turn off the circuit breaker
before performing any maintenance.
CLEANING THE FILTERS
1
Turn off the unit.
2
Remove the filters.
1
Lift the open panel.
2 Pull the air filters down to remove them.
3
Clean the filters.
Use a vacuum cleaner to remove dust. If
the filters are dirty, wash them with warm
water and a mild detergent. Dry filters in
the shade before reinstalling.
4
Reinstall the filters and close
the open panel.
MAINTENANCE
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them.
It can cause electrical shock or equipment
damage.
• Do not use hot water, thinner, abrasive pow-
ders or strong solvents.
MAI N TENA NCE AFTE R A I R
CONDITIONER SEASON
1
Operate the unit in the SELF CLEAN
operation to thoroughly dry inside
the unit.
2
Stop the operation and unplug the unit.
Turn off the circuit breaker, if you have
one exclusively for the air conditioner.
3
Clean the filters, then reinstall them.
MAINTENANCE BEFORE AIR
CONDITIONER SEASON
1
Make sure that the air filters are not
dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
AH-XPC9RV.indd 11 11.8.8 1:33:37 PM
To Next Page
Loading...
