Sharp EL-2630L - Ink Ribbon Replacement

INK RIBBON REPLACEMENT
1 .
2 .
3.
4.
5.
6 .
7.
8 .
9.
10 .
11 .
Remove the paper roll from the calculator. (Tear the paper and remove it from the
print mechanism by using Iffll . )
Set the power switch to OFF.
Make sure that the print wheel has stopped.
Remove the printer cover by sliding it towards the back of the calculator. (Fig. 1)
To remove the used ribbon, press the lever towards the center and lift the reels.
To install the new ribbon, move the lever to the far left.
With the black side of the ribbon facing upwards, place one of the reels on the reel
shaft on the right. (Fig. 2) Make sure that the reel is securely in place.
Thread the ribbon around the outside of the metal guides. (Fig. 3)
Move the lever to the right and insert the left hand reel securely.
Take up any slack by manually turning one of the reels.
Replace the cover.
Replace the paper roll.
Printer cover
Fig-1
Ink ribbon
Fig. 2
7