65
• You can enter a total of up to 100 statistical and/or cash fl ow
data items. For single-variable data, a data set without a
frequency is counted as one data item, and a data set with
an assigned frequency is counted as two data items. For two-
variable data, a data set without a frequency is counted as
two data items, while a data set with an assigned frequency is
counted as three data items.
• If you wish to correct a value before pressing
J
, press
L
or
s
to delete the entry, then enter the correct value.
Entering statistical data
Enter the data in the table to the right using
the “Stat 0” sub-mode.
Procedure Key operation Display
Enter the “Stat 0” sub-
mode.
s
m
1
0
Stat —
000
Enter statistical data.
30
J
DATA SET=
100
40
>
2
J
DATA SET=
200
50
J
DATA SET=
300
Return to the “Stat 0”
display.
s
Stat —
000
If there is data stored in memory, press
.
b
(within
STAT mode) to clear it.
The format of the data set (the sample and frequency values)
number, which is initially set to “1.00”, is dependent on calcu-
lator notation settings.
DATA
30
40
40
50
*
1
*
2
*
1
*
2
To Next Page
Loading...
