EasyManua.ls Logo

Sharp K-60D19IM1-EU - Installation of Built-in Oven; Cabinet Installation Procedure

Sharp K-60D19IM1-EU
154 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ins, oil, cloth etc., which quickly catch
re.
Furniture surrounding the oven must
be made of heat resistant materials -
more than 50 C° of the room tempe-
rature.
EN - 8
Required changes to wall cabinets and
exhaust fans above the built-in combi-
ned product as well as minimum he-
ights from the oven board are shown in
Figure 1. Accordingly, the exhaust fan
should be at a minimum height of 65 cm
from the hob board. If there is no ex-
haust fan the height should not be less
than 70 cm.
HOB
Minimum
42 cm
Minimum
42 cm
Minimum 65cm
(with hood)
Minimum 70cm
(without hood)
INSTALLATION OF BUILT-IN
OVEN
Insert the oven into the cabinet by pus-
hing it forward. Open the oven door and
insert 2 screws in the holes located on
the oven frame. While the product fra-
me touches the wooden surface of ca-
binet, tighten the screws.
Worktop
min.
25 mm
min.
50 mm
Built-in hob
Built-in oven

Related product manuals