This function is used to cook according
to desired nishing time. The food
to be cooked is put into the oven.
The oven is adjusted to the desired
cooking function. The oven thermostat
is adjusted to the desired degree
depending on the dish to be cooked.
Keep pressing the MODE button until
you see “end” on the timer screen,
symbol (A) and the day’s time will
respectively begin to ash.
Adjust the nishing time for the food
you wish to cook, by using the (+)
and (-) keys while the timer is in
this position. Some time after the
adjustment operation is completed, the
current time will appear on the screen
and symbols (A) and will begin to
continuously light on the screen. While
doing this, the oven will also start to
operate.
You can set a time which can be up to
10 hours after the current time.
Upon completion of the set duration,
the timer will stop the oven and an give
audible warning. The the symbol (A)
will also begin to ash on the screen.
After bringing the oven button and
oven thermostat button to 0 position,
pressing any button of the timer will
end the audible warning. The timer
will also be brought to manual use
function.
Full-Automatic Programming:
+
-
MODE
A
du
r
This function is used to cook food after
a certain period of time, within a certain
duration. The food to be cooked is put
into the oven. The oven is adjusted to
the desired cooking function. The oven
thermostat is adjusted to the desired
degree depending on the dish to be
cooked.
First, keep pressing the MODE button
until you see “stop” on the timer
screen. When you see “stop” on the
timer screen, the symbol (A) will begin
to ash. Adjust the cooking period for
the food you wish to cook, by using
the (+) and (-) keys while the timer is
in this position. Some time after the
adjustment operation is completed, the
day’s time will appear on the screen
and the symbols (A) and will begin to
continuously light on the screen.
EN - 19
To Next Page
Loading...
