Sharp LC-20VSG - Ram Movement and Swivelling Instructions

OPERATOR’S MANUAL
P 32 / 57
3. Movement and turning of ram:
Ram Movement :
a. Loosen the two ram set bolts（A&B）
b. Turn the crank lever to move the pinion bolt （C）for the desired position of ram.
c. Lock the end set bolt（B）at the rear end of ram before setting the lock bolt （A）at the
front end.
Ram Swivelling :
a. Use an open mouth spanner to loosen the four bolts（E）.
b. Push the ram manually and turn it to the desired position before locking the nuts again
（E）.
Fig.36