Sharp MD-MS722H - To Erase Tracks; Erase All Tracks at Once; Erase Tracks One at a Time

MD-MS722H/MS721H
– 21 –
: INNER switch position measurement menu : Continuous playback (pit section)
# # # # : Address
PLAY
I N N E R
Inner Switch Position Measurement
S Q # # # #
* When the [STOP] key is pressed in specific menu, the "TEST MODE STOP" state is set.
: TEST mode normal playback menu : Continuous playback
@@@@@: Mode and address display
PLAY
N O R M A L
Test Mode Normal Playback
@ @ @ @ @
* When the [STOP] key is pressed in specific menu, the "TEST MODE STOP" state is set.
: Digital input single monitor menu : FS code, C bit data display
: Address : Control code : Category code
PLAY
D i n M o n
Digital Input Signal Monitor
C
: U bit 1 data display
: TNO : INDEX
SKIP UP
U 1
SKIP UP
SKIP DOWN
SKIP DOWN
: U bit 2 data display
: TIME (min.) : TIME (sec.)
U 2
* When the [STOP] key is pressed in specific menu, the "TEST MODE STOP" state is set.
: Error history display menu
: Error history 0 display
§ § : Error code
: Error history 1 display
§ § : Error code
: Error history 2 display
§ § : Error code
: Error history 3 display
§ § : Error code
: Error history 4 display
§ § : Error code
: Error history 5 display
§ § : Error code
: Error history 6 display
§ § : Error code
: Error history 7 display
§ § : Error code
: Error history 8 display
§ § : Error code
: Error history 9 display
§ § : Error code
PLAY
E D A T A
Error History Display
E 0 § §
E 1 § §
: Error history display menu
: Error history clear
PLAY
E D A T A
C L E A R
SKIP UP SKIP DOWN
E 2 § §
SKIP UP SKIP DOWN
E 3 § §
SKIP UP SKIP DOWN
E 4 § §
SKIP UP SKIP DOWN
E 5 § §
SKIP UP SKIP DOWN
E 6 § §
SKIP UP SKIP DOWN
E 7 § §
SKIP UP SKIP DOWN
E 8 § §
SKIP UP SKIP DOWN
E 9 § §
SKIP UP SKIP DOWN
• Error history clear • Error history display * When the [STOP] key is pressed in specific menu, the "TEST MODE STOP" state is set.