Sharp MD-MT15

m Move
1 Play the track to be moved, and press
t
(© The unit will enter the pause mode.
2 Press the EDIT button to select" MOVE”
aie
“To move the th track
3 Press the ENTERSYNC button.
@7o cancel the operation, press the
W.OFF bution
4. Press tho 4a oF bt button to soloct
the direction to move.
To increase the track number. Pet
To decrease the track number. be
3 4
|o59 01 2 | | 05> 03 2 |
(Checking the (To move itto the
movement) third track)
'5 Press the ENTER/SYNC button again.
(©The track willbe moved, and the unit
willbe paused a the beginning ofthe
track.
Note:
When a trackhas been moved, the other
tracks which are affected by the move
willbe assigned new track numbers au-
tomatically.
Example:
When moving the fifth track to the third,
track, the old thir track willbecome the new
fourth track and the old fourth track will be-
‘come the new fith track.
1 start playing the rack you want to -
vide into two. Press the Beit button at
the point where you want to divide the
track.
(© The unit will enter the pause mode
2 Press the EDIT button to select “D-
VIDE.
spit
Si berthatmmsitat
ua ates }
Tove he fourth rack
3 Press he ENTER/SYNC button.
To cancel the operation, press the
MLOFF button
3
[DIVIDE OK?
(Confirming the spit)
4 Press the ENTERISYNC button again.
(© The track will be divided into two
tracks, and the unt wil be paused at
the begining ofthe second othe two
tracks
(© The numbers of the tracks which
come alter the divided track wil be
increased by one automaticaly
Notes:
‘© Wen a track that has a name's divided,
the two new tracks will have the same
name. However, in the TOC FULL con-
‘ition, the second track may not be
named.
(@ Each disc can hold up to 255 tracks.
However, even ithe numberof assigned
tracks has not reached 254, it might not
‘be possible to make any further divisions
of tracks.
= Combine
1 start playing the tat ofthe two tracks
yyouwant to combine, and press the Pit
bution.
‘© The unit will enter the pause mode.
2 Press the EDIT button o select “COM-
BINE.
1 z
oat to. et
Gey ae en
Sonne
‘3 Press the ENTERISYNC bution
(© To cancel the operation, press the
Dee
ost 06-2 |
(Conte combraton)
4 ross the ENTER/SYNC button again.
(© The two tracks willbe combined, and
the unit wil be paused at the begin-
fing of the combined track.
(@ The numbers assigned to the tracks
{following the combined track will be
‘decreased
by
one
automatically.
‘To combine two non-adjacent tracks:
First, put the two tracks next to each other
inthe order you want using the MOVE func-
tion (page 27). Then combine them using
the COMBINE function.
When one or both tracks to be combined
have aname:
‘The frst track name willbe used. However,
when the frst track does not have a name,
the second track name wil be used.
In the following cases, tracks may not
be combined. za
© Tracks recorded in the monaural iong-
play mode and tacks recorded nthe
Steeo mode.
(© Tracks recorded from digital inputs and
tracks recorded from anslog inputs
(© Tracks whase recoring time eles than
12 seconds.
Disc name
© Discs can be named using a maximum
‘of 100 characters.
© Upto 1,700 characters (approximately)
‘can be used inthe disc and track names
‘ona single MiniDisc,
1 Wien he stop mode, press the EDIT
button to select “DISC NAME”,
2 Press the ENTER/SYNC button
‘© The unit wil enter the character input
mode
‘© To cancel the operation, press the
3 Prose the DISPLAY button ropeatedy to
‘elect the type of characters.
(© The first 3 charactors in the group of
the selected characters will be dis-
played for about 1 second.
ieee
[Eecemies
sutccpcrioa
4 Press the 144 or P>1 button repeatedly
saat a
beep aid
poy eel
change rapidly.
3 4