Sharp MD-MT15

{© The continuous recording time is for analog inputs when the volume levels setto “VOL.
o
{© The continuous play time shows the value when the volume lovel is sotto “VOL 15°.
'@ The above values are the standard values when the unit is charged and used at an
ambient temperature of 68°F (20°C).
‘© The operating time when using an alkaline battery may be different, depending on the
type and manutacturer of the battery, and on the operating temperature.
Input sensitivity:
Output level:
Dimensions:
Recording level | Reference input level | Input impedance
MICH 025 mv TOK ohms
Mick 25mv TO kohms
TNE 100 mv 20k ohms
Specified | Maximam Toad
output _| outputlevel_| impedance
Headphones | — _ |10mW+10mW| 16 ohms
250 mv =
Une ues) 10k ohms
Width: 3-7/1" (87.9 mm)
Height: 1-3/16" (29.8 mm)
Depin: 3-1/8" (79.7 mm)
0.40 Ibs. (1809) without battery
Line/optical digital, microphone (powered by the main unit)
Headphones (impedance: 19 ohms)
Portable MiniDisc recorder
‘Non-contact, 3-beam semi-conductor laser pick-up
‘Stereo 2 channels/monaural (ong-play mode) 1 channel
20 20,000 Hz (+3 48)
‘Approx. 400 — 900 rpm
ACIRC (Advanced Cross interleave Reed-Solomon Code)
'ATRAG (Adaptive Transform Acoustic Coding), 24-bit com-
uted type
Magnetic modulation overwrite method
44.1 kz (32 kHz and 48 kHz signals are converted to 44.1 kHz,
‘and then recorded.)
‘Unmeasurabie (less than 40.01% W. peak)
a
MEMO.