Sharp MD-MT15

PRECAUTIONS
Important
‘© Donot wear yourhheadphones when you
are crossing streets or near trafic
‘© Donat use your headphones while driv
ing amotor vehice, it may create a dan-
gerous traffic hazard and may be ille-
{gal, Remember to obey all ofthe safety
‘ules in your area.
‘© Do not play the unit at a high volume,
Hearing experts advise against ex-
tended listening at high volume levels.
@ If you experience ringing in your ears,
reduce the volume or discontinue use.
Volume setting
Reduce the volume before starting to play.
MiniDises, compared to ordinary cassette
tapes, have very litle noise.
It
the
volume
is
adjusted
according
to
your
‘usual
expectations
of
noise.
you
may
dam-
‘age
your
hearing
due
to
the
high
volume.
‘Concern for others when listen-
“Tng to Minibises
njoying listening to music, the
aping from your headphones may
‘annoy people around you,
re using the unit in particularly
places (such as on trains or
buses), reduce the volume to avoid annoy:
ing people around you.
Storing the unit
‘Avold using oF leaving the unit in the
following places.
@ Places exposed to direct sunlight for
‘many hours (especially in cars with the
doors and windows closed) or near heat-
ers.
(The cabinet may deform, change color
‘or the unit may malfunction.)
Places exposed to water.
Places exposed to excessive dust.
Places
where
temperatures
are
exces-
sively high or low.
Paces (bathrooms) where the humidity
Is extremely high
Places with strong magnetic fields such
{as TVs or loudspeakers.
Paces exposed to vibration.
laces where sand can easily enter the
inside of the unit (beaches etc.)
It the unit is used near radio tuners or
‘TVs, noise and/or picture interference
may result you experience these prob-
lems, move the unit away from such de-
Vices.
© 00 © © eco
Precautions
To avold accidental electric shock or
other possible problems, observe the
precautions listed below.
Do not disassemble or modi the unit.
Do not drop or subject the uni to shock.
‘Do not use the unit near open flames.
Do not spill iquid on the unit.
‘Do not use an extemal power supply,
‘other than the SV DC supplied with this
‘nit, as it may damage it.
SHARP is not responsible for damage
due
to
improper
use.
Reter
all
servicing
toa
SHARP
authorized
service
center.
NAMES OF CONTROLS AND INDICATORS
15 16
18 19 20
1. Monaural Long-Play Mode Indicator
2. Record Indicator
3. Level Meter
44. Fast Play Indicator
5. Repeat Indicator
6. TOC Indicator
7. Battery Indicator
8. Random Indicator
9. Track Number Indicator
10. Character/Time Information Indicator
11. Synchro Recording Indicator
12, Disc Mode Indicator
13, Disc Name Indicator
14. Track Name Indicator
15, Remaining Recording Time indicator
16. Total Track Number Indicator
17. Edit/Auto Mark/Time Mark Button
18, Mode Button
19, Display/Character Select Button
20. Bass/Delete Button
21, Entor/Fast Play/Synchro Button
22. Volume Up/Cursor Button
23, Volume Down/Cursor/Charge Button
24, Record/Track Mark Button
25, Fast Reverse/Recording Level Down!
Name Select Button
26. Stop/Power Off Button
27, Play/Pause Button
28. Fast Forward/Recording Level Up/
‘Name Select Button
29. Open Lever
30, Headphones Jack
31. Optical/Line Input Jack
32. Microphone Input Jack
33.Hold Switch
34.5V DC Input Jack
35. Battery Cover