1-141
BEFORE USING THE MACHINEâ–ºPERIPHERAL DEVICES
External count mode
Unlike in external authentication mode, when the machine is started in "external count mode", the login screen of the
external account application is not displayed after the machine has started up. Only the job result is sent to the external
account application.
External count mode can be used together with the user control function of the machine. (External count mode can also
be used when the user control function is disabled.)
To enable the external count mode:
In "Settings (administrator)", select [System Settings] → [Sharp OSA Settings] → [External Accounting Application Settings]
and enable the [External Account Control] setting alone.
To Next Page
Loading...
Need help?
General
