Sim 25-02 Auto Developer Adjustment - Select CMYK.
*1 set of CMYK Developer is provided with each machine*.
ALL TONER CARTRIDGES must be removed before executing Automatic
Developer Adjustment.
For optimum image quality and performance, it is recommended to setup
and install Developer at the customer site (environment).
Clean LSU Dust Proof Glass.
TONER INSTALLATION & REPLENISHMENT:
Install CMYK Toner Cartridges:
Caution:
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation
Mode during Initial Toner Replenishment.
PRODUCT ACTIVATION & FIRMWARE UPGRADE:
Activation of Optional Products:
System Settings – Common Settings – Product Key.
Sim 22-05 Check Firmware Version(s): Upgrade to latest version.
Sim 26-01 Right Exit Tray Installation: Yes/No.
Sim 26-02 LCC Installation (Paper Size): A4/Letter.
Sim 26-06 Machine Destination check.
Sim 26-35 Set Multi Error Counter: Set to 1 (Multi Count).
Sim 26-50 Long Paper Support (up to 1200mm): 0 = Disable, 1 = Enable.
Sim 26-52 Non Printed Paper Counter Set-up.
Sim 55-03 Process Mixed Size Pages (orientation) when Printing in Duplex:
SSW 3-6, 0 = Disable, 1 = Enable.
Sim 55-03 PDF/PS Preview Thumbnail for Direct Print Function:
SSW 34-3, 0 = Disable, 1 = Enable.
Toner Remaining Status Display [Home Screen]:
System Settings – Home Screen Settings – Display Toner Quantity.
Adjust Date/Time (Inc. Daylight Saving setting):
System Settings – Common Settings – Clock Adjust.
Keyboard Language Setting:
System Settings – Common Settings – Default Keyboard Setting.
Paper Size & Type Settings:
System Settings – Common Settings – Paper Tray Settings.
Set cassette size by adjusting the guides in the cassette.
To Next Page
Loading...
