Sharp MX-3070N

SHARP
MAINTENANCE
19
MX-3070N
MX-3570N
MX-4070N
Every
250K
Every
300K
FUSER SECTION (CONT’D):
Sim 24-04 Clear Fusing Belt Counters.
Clear Fusing Roller Counters.
Clear Press Roller Counters.
Clear Separation Pawl Counters.
Clear Separation Plate Counters.
Clear Fusing Unit Counter.
TRANSFER SECTION:
Replace Primary (Image) Transfer Belt Kit (MX-607B1):-
 Primary Transfer Belt
Replace Primary Transfer Cleaning Blade Kit (MX-607TL):-
 Primary Transfer Blade.
 Cleaning Roller
Apply Yellow Toner [CKOG-0345DS51] to Primary Transfer Belt
Replace Secondary Transfer Roller Kit (MX-607B2):-
 Secondary Transfer Roller Unit.
Clean ID & Registration Sensors.
Sim 24-04 Clear TC1 Belt Counters.
Clear Trans Blade Counters.
Clear TC1 Belt Unit Counter.
Clear TC2 Roller Counters.
Clear TC2 Roller Unit Counter.
Sim 50-22 Drum Position & Registration Adjustment - select ALL.
Every
300K
Every
300K
FILTER SECTION:
Replace Ozone Filter Kit (MX-607FL):-
 Ozone Filter
Sim 24-04 Clear Ozone Filter Counter.
INNER FINISHER [MX-FN27]
Clean inlet paper transport rollers.
Clean paper exit paddle.
Clean paper guides and tray.
Replace Staple Unit every 200K staples [0CW4H560160//]
Replace Staple Less Staple Unit assembly every 20K staples
[0CW4M511130//]