Sharp MX-3070N

SHARP
PERIPHERAL SPECIFICATION
5
MX-TR20 – JOB SEPARATOR TRAY
Output capacity (80 g/m
2
):
Upper Tray
Centre Tray
100 sheets
250 sheets
Paper size:
Offset
Output only
A3 to A5R
SRA3 to A5R (including envelope & custom size paper)
Paper weight:
Upper Tray
Centre Tray
55 g/m
2
to 256 g/m
2
55 g/m
2
to 300 g/m
2
MXFN27 – INNER FINISHER
Paper size:-
Non offset
Staple
SRA3 to A5
A3 to B5
Output capacity (80 g/m
2
):
500 sheets or 30 bundles or 52mm or less (A4, 8.5x11).
250 sheets or 30 bundles or 26mm or less (A3, 11x17).
Stapling capacity (90 g/m
2
):
50 sheets (A4, 8.5x11), 30 sheets (A3, 11x17 & mixed).
Max: 300 g/m
2
(2 sheets) + 90 g/m
2
(48 sheets)
Staple position:
3 locations (Front slant, Rear slant & 2 staples).
Staple less staple:
Supported - Maximum 5 sheets (A3, A4, B4, B5):-
Recommended: Up to 5 sheets (64 g/m
2
), Up to 4 sheets
(64-81 g/m
2
), Up to 3 sheets (81 to 105 g/m
2
).
Manual staple:
Supported (Rear slant only).
Punch Unit:
Opt: MX-PN14B/C/D
Power requirements:
Supplied by main unit
MX-FN29 – 1K SADDLE FINISHER
Paper size:-
Non offset
Staple
Saddle
SRA3 to A5R
A3W to B5R
A3W, A3, A4R, B4, B5R
Output capacity (80 g/m
2
):
Offset Tray
Saddle Tray
1,000 sheets or 100 bundles or 149mm or less (A4, 8.5x11).
500 sheets or 50 bundles or 74.5mm or less (A3W, A3, 11x17)
1–5 sheets: 20 sets, 6–10 sheets: 10 sets,
11–15 sheets: 7 sets.
Stapling capacity
(90 g/m
2
):
Offset Tray
Saddle Stitch
50 sheets (up to A4), 30 sheets (up to A3 & mixed).
Max: 300 g/m
2
(2 sheets) + 90 g/m
2
(48 sheets)
15 sheets - (Booklet Front cover up to 220 g/m
2
)
Staple position:
3 locations (Front flat, Rear flat & 2 staples).
Staple less staple:
Not supported
Manual staple:
Not supported
Punch Unit:
Opt: MX-PN15B/C/D
Power requirements:
From Main Engine