Sharp MX-3070N

SHARP
TROUBLE CODES
61
F2
Process Section Trouble
67
Toner supply operation trouble (Y)
70
Improper toner cartridge detection (K)
71
Improper toner cartridge detection (C)
72
Improper toner cartridge detection (M)
73
Improper toner cartridge detection (Y)
74
Toner cartridge CRUM error (K)
75
Toner cartridge CRUM error (C)
76
Toner cartridge CRUM error (M)
77
Toner cartridge CRUM error (Y)
78
Image density registration sensor trouble
95
Toner cartridge replacement trouble (K)
96
Toner cartridge replacement trouble (C)
97
Toner cartridge replacement trouble (M)
98
Toner cartridge replacement trouble (Y)
F3
Paper Tray Lift Trouble
12
Paper feed tray 1 lift up trouble
22
Paper feed tray 2 lift up trouble
F6
FAX Trouble
00
MFP-Fax communication trouble
01
Fax EEPROM read/write error
02
Fax PWB power supply trouble
04
Fax modem operation trouble
21
LIU & Fax soft switch error (combination)
30
Fax power controller error
97
Fax PWB – Main body compatibility trouble.
98
Improper Fax & Main body destination
setting
H2
Thermistor Trouble (Fuser Section)
00
Thermistor open trouble (TH_UM)
01
Thermistor open trouble (TH_LM)
02
Non-contact thermistor (upper sub TH_US1
detection) open trouble (TH_SUB2_2)
03
Non-contact thermistor upper main TH_UM
compensation open trouble (TH_UM_AD1)
05
Non-contact thermistor upper sub TH_US1
compensation thermistor open
(TH_SUB2_2_CS)
06
Upper edge section thermistor open
(TH_US2)
H3
High Temperature Trouble (Fuser Section)
00
Fuser high temperature (TH_UM).
01
Fuser high temperature (TH_LM).
02
Sub thermistor fusing section high
temperature (TH_US1).
H4
Low Temperature Trouble (Fuser Section)
00
Fuser low temperature trouble (TH_UM)
01
Fuser low temperature trouble (TH_LM)
02
Sub thermistor fusing section low
temperature trouble (TH_US1)
30
Upper main thermistor differential input
abnormality (TH_UM)
32
Upper sub thermistor differential input
abnormality (TH_US1)
H5
Fusing Section Jam Trouble
01
5 continuous (POD1 not reach) jams
H7
Temperature Recovery Trouble (Fuser)
10
Upper fuser main low temperature recovery
error
12
Recovery error from low fuser temperature
(TH_US)
L1
Scanner Feed Trouble
00
Scanner feed trouble.
L3
Scanner Return Trouble
00
Scanner return trouble.
L4
Motor / Fan Trouble
02
Paper feed motor trouble
03
Fusing motor trouble
06
Transfer unit lift trouble
09
Registration motor lock trouble
11
Shift motor trouble
12
Secondary transfer separation trouble
16
Fuser pressure release trouble
17
Drum motor lock trouble (K)
18
Drum motor lock trouble (Colour)
32
Power source cooling fan motor 1 trouble
35
Fuser cooling fan trouble
43
Paper delivery cooling fan R trouble
50
Process fan motor 1 trouble
51
Process fan motor 2 trouble
71
Motor control IC trouble
75
Paper exit motor trouble
76
Reverse motor lock trouble
77
ADU motor upper lock trouble
78
ADU motor lower lock trouble
79
PS Transport motor lock trouble