Sharp MX-3071

45
Fax Problems
I DON'T KNOW HOW TO FORWARD RECEIVED
FAXES
Check Solution
Use the received fax forwarding
settings in setting mode.
■ You can forward received faxes to a forwarding destination set in advance.
Enable [Inbound Routing Settings] in "Settings (administrator)"
- [System Settings]
→ [Image Send Settings]
→ [Inbound Routing (Forwarding/Storing) Settings] → [Administration Settings].
Tap [Add] and set the forwarding destination and forwarding conditions. When
the settings are completed, received faxes will be forwarded according to the set
conditions.
I DON'T KNOW HOW TO PREVIEW RECEIVED
FAXES
Check Solution
Enable the image preview setting for
received faxes in setting mode.
■ You can forward received faxes to a forwarding destination set in advance.
Enable [Received Data Image Check Setting] in "Settings (administrator)" -
[System Settings]
→ [Image Send Settings] → [Common Settings] → [Condition
Settings].
When a fax is received, tap the icon that appears next to the [Job Status] key at
the top of the screen. In the system information screen that appears, tap the
[Event Information] tab and tap the [Check Fax Reception Image] key. Tap the
key of the received fax that you want to check, and tap [Check Image] on the
action panel to show a preview of the fax.
?
!
?
!