Sharp MX-3071 User Manual

22
BEFORE USING THE MACHINE
LOADING PAPER IN OTHER TRAYS
Bypass tray
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
1
Open the bypass tray.
When loading paper larger than 8-1/2" x 11"R or A4R, pull
out the extension guide.
Pull the extension guide all the way out.
2
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
3
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.
When loading envelopes in the bypass tray, set the paper type.
► CHANGE THE SETTING OF THE PAPER TRAY (page 25)
Place the front side facing
down.
Flap

Sharp MX-3071 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Memory	5 GB
Hard Disk Drive	500 GB
Functions	Print, Copy, Scan, Fax
Max Copying Resolution	600 x 600 dpi
Duplex Copying	Yes
Scanning Color	Yes
Duplex Scanning	Yes
Standard Paper Capacity	650 sheets
Print Speed	30 ppm
Connectivity	USB, Ethernet
Type	Multifunction
Copy Speed	30 cpm
Automatic Document Feeder (ADF)	100 sheets
Operating System Compatibility	Windows, Mac, Linux
Max Paper Capacity	6300 sheets