Sharp PC-A820 - Page 54

4-7
4
4. Use the check boxes to turn on or off the display to the built-in screen (called
LCD in this window) and the external monitor (called CRT for Cathode Ray
Tube in this window).
5. Use the slider bars to adjust the resolution and the refresh rate of the display on
the external monitor.
6. Click on
Apply
and verify that the display is the way you want it. Click on
OK
to
exit the
NeoMagic MagicMedia Properties
window.
Switching with Hot-keys
After switching the display with software in the first instance, you can then use the
display switching hot-keys
Fn
+
F5
Switch display between the built-in screen, an
external monitor, and a simultaneous display