Sharp PN-CD701 - TURNING POWER ON;OFF

6. Enable LAN 1 Network
LAN 1 Network will be back to “disable” after disconnect PC devices because of security issue.
(Except when you choose “LAN 1 Network Always-on”.)
Matrix of LAN1 Network status
Setting
USB type
-C 1
USB type
-C 2
USB
-B
Plug
Unplug
Plug
Unplug
Plug
Unplug
LAN1
Network
ON
E D*
1
E D*
1
E D*
1
OFF
D D D D D D
LAN1 Network
Always
-on
ON
E E E E E E
OFF
*
2
*
2
*
2
*
2
*
2
*
2
E : LAN1 network connection is enable
D : LAN1 network connection is disable
*
1
If there are other connected terminals, Network connection will remain enable.
And, setting of “LAN1 network” remains “ON”.
*
2
Depends on setting of “LAN1 Network”.
The Setting value of
“LAN1 network” is
automatically
changed to OFF.
16
6-3. Matrix of LAN1 Network status