Sharp PYTHAGORUS - Page 16

8 | Page
-F-

ALL MODES:
• s and alpha characters
Ex: -F-SIN 30° =>

REC
(record key)
Page 57
• transfers program / data from computer to

• Used with -,-
LOD
(load key)
Page 58
• Transfers program / data 
computer.
• Used with -,-
CHK
(check key)
Page 58
• Checks the data or program contents recorded

recorded on the calculator, and points to the
line at which the error was detected.
• Used with -,-
TRC
(print trace mode key)
AUT MODE:
• Used to set up or cancel trace 
• All keys, strokes and results are printed in

LST
(list program key)
Page 66
• 
complete program print desired, in AUT mode,
press the CA key. This will set the program at
line 00; and the LST key will then print the
complete program.
• You can list from a line to another line inclusive.