68 | Page
_____________________________________________________________
TWO PROGRAM EXAMPLES:
To introduce programming an example of the Great Circle track and
Great Circle Plotting (also known as Intermediate Latitude from
Intermediate Longitude) program is given. The code in single
command format is on the left, and explanation on the right.
For the A B C X Y to function correctly as user assigned
keys, the switch must be selected too DEF. In the
following program “A” and “B” are the subroutine
labels. In this example, with the switch selected to
DEF, only the A or B keys need to be pressed after
executing the load routine. If in AUT mode then GTO “A” => or GTO
“B” => would need to be entered.
To Next Page
Loading...
