Sharp R-1900J - Page 19

18
1 Press the SET MEMORY pad
twice within 2 seconds.
NO.
X 2
NO.
6 Press the STOP/CLEAR pad.
5 Press the SET MEMORY pad.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-programme.
See Maximum Cooking Time on page 19.
3. Refer to NOTE for Express Defrost on page 8.
4 Enter cooking time.
DEF.
2 Enter memory number.
NO.
3 Press the EXPRESS DEFROST pad.
DEF.
Procedure Display
3. Setting Total Cooking Time of Express Defrost
* Suppose you want to set the total cooking time of Express
Defrost to 30 minutes with memory 2 using Dual Digit
Input.
* Suppose you want to set the Total Cooking Time of Express
Defrost to 30 minutes with memory 2 using Single Digit
Input.
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter memory number.
NO.
NO.
NOTES:
1. Follow steps 3-6 on the left side of page 18 to complete.
2. Press the SET MEMORY pad twice within 2 seconds.
3. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-programme.
See Maximum Cooking Time on page 19.
4. Refer to NOTE for Express Defrost on page 8.
* Suppose you want to set the Total Cooking Time of Express
Defrost to 30 minutes with memory 12 using Repeat Digit
Input.
Procedure Display
NO.
NO.
Procedure Display
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter memory number.
NOTES:
1. Follow steps 3-6 on the left side of page 18 to complete.
2. Press the SET MEMORY pad twice within 2 seconds.
3. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-programme.
See Maximum Cooking Time on page 19.
4. Refer to NOTE for Express Defrost on page 8.
X 2
X 2
3 0 0 0
02
2
22
R-1900J [EN].indd Sec1:18R-1900J [EN].indd Sec1:18 4/28/09 10:01:29 AM4/28/09 10:01:29 AM